RE: {bb} bb-prtdiag-4_5.tar.gz posted to deadcat.

[Kevin.Hanrahan@novainfo.com]

Craig,
 I added this utility to one of my sun boxes, added the lines to bbsys.local
as specified, but I get these errors:

PLATFORM_SPEC command is not defined in etc/bbsys.local - using default:
SUNW,Ultra-4

 PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default:
/usr/platform/SUNW,Ultra-4/sbin/prtdiag

 PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v

 EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default:
Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80
UltraAX-i2|UltraSPARC-IIi-cEngine Sun-Fire

 PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using
default: No failures|Most recent AC Power Failure|Minimum Available|CS
Fail|No Hardware failures|^===|currently no Boards|Fault     Fan

 PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using
default: No System Faults found|Fault Value|Fault LED|NO_FAULT|Power
Fault|Status        Fault|Fault           off



Here is my bbsys.local:

UNAME="/bin/uname"
PLATFORM_SPEC=`$UNAME -i`
PRTDIAG_COMMAND="/usr/platform/$PLATFORM_SPEC/sbin/prtdiag"
PRTDIAG_OPT="-v"
Systems that don't support temperature checks
EXCLUDE_SYSTEMS="Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80
UltraAX-i2|UltraSPARC-IIi-cEngine Sun-Fire Netra-T4"
PRTDIAG_IGNORE_ERRORS="No failures|Most recent AC Power Failure|Minimum
Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault
Fan"
PRTDIAG_IGNORE_FAULTS="No System Faults found|Fault Value|Fault
LED|NO_FAULT|Power  Fault|Status        Fault|Fault           off"
LOM_COMMAND="/usr/sbin/lom"
LOM_OPT="-pfvt"

export UNAME PLATFORM_SPEC PRTDIAG_COMMAND PRTDIAG_OPT
export EXCLUDE_SYSTEMS LOM_COMMAND LOM_OPT
export PRTDIAG_IGNORE_ERRORS PRTDIAG_IGNORE_FAULTS




Where did I make my mistake?

Thanks,
 KEvin

-----Original Message-----
From: Craig Cook [mailto:craig@cookitservices.com] 
Sent: Thursday, February 24, 2005 4:04 PM
To: bb@bb4.com
Subject: {bb} bb-prtdiag-4_5.tar.gz posted to deadcat.


New verison...

#       4.5   - Added disk checks for 480R
#             - Corrected activity LED checks for E250 & E450
#             - Added more debug code
#             - Modified to allow passing of parameters for testing
#             - Applied patch from Kelvin Russell
#               - Corrected 480R fan checks

I have noticed that it does not handle 440's... anyone care to add support?

Thanks

Craig Cook
--
Big Brother Consulting and Training Services www.cookitservices.com

-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, or to subscribe to the bb-digest list send
e-mail to mailto:majordomo@bb4.com with unsubscribe bb -and/or- subscribe
bb-digest in the BODY of the message.

Note:  The information contained in this email and in any attachments is
intended only for the person or entity to which it is addressed and may
contain confidential and/or privileged material.  Any review,
retransmission, dissemination or other use of, or taking of any action in
reliance upon, this information by persons or entities other than the
intended recipient is prohibited.  The recipient should check this email and
any attachments for the presence of viruses.  Sender accepts no liability
for any damages caused by any virus transmitted by this email. If you have
received this email in error, please notify us immediately by replying to
the message and delete the email from your computer.  This e-mail is and any
response to it will be unencrypted and, therefore, potentially unsecure.
Thank you.  NOVA Information Systems, Inc.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, or to subscribe to the bb-digest list
send e-mail to mailto:majordomo@bb4.com with unsubscribe bb -and/or-
subscribe bb-digest in the BODY of the message.