RE : RE : {bb} bb-sar.sh seems to be truncating data on some boxes

could you please try to move the sard -d solaris section in the bb-sar-sa.sh or bb-sar-up.sh script ?

this will check if the problem comes from the sar -d section.

(but if it's the case, i can't help you further as I don't have any solaris box here).

N F

-----Message d'origine-----
De : owner-bb@bb4.com [mailto:owner-bb@bb4.com] De la part de David W Murphy
Envoyé : mercredi 22 juin 2005 13:58
À : bb@bb4.com
Objet : RE: RE : {bb} bb-sar.sh seems to be truncating data on some boxes

Tried that - didn't make a difference.

Here's what the page looks like. on all the servers. Obviously the figures are not the same, not the names :-)
isws8 - sar

green Wed Jun 22 11:47:03 GMT 2005 - sar output

[-u] CPU Utilization SunOS isws8 5.8 Generic_117350-16 sun4u 06/22/05 11:42:00 %usr %sys %wio %idle 11:47:00 96 4 0 0
[-b] Buffer Activity SunOS isws8 5.8 Generic_117350-16 sun4u 06/22/05 11:42:00 bread/s lread/s %rcache bwrit/s lwrit/s %wcache pread/s pwrit/s 11:47:00 0 75 100 1 5 85 1 0
[-d] Disk Activity<
Note the < at the end of the Disk Activity line - not sure if it's significant.

Cheers

Dave

From: owner-bb@bb4.com [mailto:owner-bb@bb4.com] On Behalf Of FIGARO Nicolas
Sent: 22 June 2005 10:59
To: bb@bb4.com
Subject: RE : {bb} bb-sar.sh seems to be truncating data on some boxes

If I remember well there is a max size set to limit bb messages.

check for a MAXLINE entry in bbdef.sh.

try to modify the value and see if it runs well afterwards.

check also the definition in bbd/src/bb.h.

perhaps you'll have to increase the value in bb.h and recompile to have the whole sar messages.

N F

-----Message d'origine-----
De : owner-bb@bb4.com [mailto:owner-bb@bb4.com] De la part de David W Murphy
Envoyé : mercredi 22 juin 2005 11:26
À : bb@bb4.com
Objet : {bb} bb-sar.sh seems to be truncating data on some boxes

Guys,

I am using bb-sar.sh to pull back sar data in larrd. I am having trouble on certain boxes (mostly servers connected to a SAN or with a lot of disks attached) where the sar output stops just after the url for Disk Activity.

Any Ideas ?

I'm not sure that is a straight truncation issue as there is not a lot of data on screen and I don't get the Data Truncated message.

Any thoughts would be appreciated.

Many Thanks

Dave Murphy

Unix Systems Administrator

TSG Unix Team
'
È
02075 428627

07710 400301

----------- -----------------------------------------------------
Visit our Internet site at http://www.reuters.com

To find out more about Reuters Products and Services visit http://www.reuters.com/productinfo

Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.

----------- -----------------------------------------------------
Visit our Internet site at http://www.reuters.com

To find out more about Reuters Products and Services visit http://www.reuters.com/productinfo

Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.